TMGG12864T

Format: 128 * 64 dots
LCD Mode: FFSTN, Negative, Transmissive
Viewing Direction: 6 o'clock
Driving Scheme: 1/65 Duty cycle, 1/9 Bias
Single Supply Voltage: Power supply voltage range (VDD): 2.7~3.5V
Low current sleep mode
64 level of Internal Contrast Control and External Contrast Control
8-bit 68/80-series Parallel or Serial Interface
Vertical Scrolling, Display offset control
On-chip DC-DC Converter
With white color LED backlight, 50K hour life-time


(852) 2342 1136 Inquiry Now

Product Details

Interface

Mechanical Spec.

Full Spec.

Resolution	128 * 64 Dots	Module Size (mm)	68.80 * 49.20
Viewing Area (mm)	60.60 * 33.10	Character Size/Dot Pitch (mm)	0.43 * 0.43
Dot Size (mm)	0.415 * 0.415	Type	COG
Connection	Metal Pin	IC	ST7565 or equivalence
Display Mode	+Ve or -Ve/ STN, FSTN, FFSTN	Backlight Color	YG, R, G, B, W

LCD Pin Description:

Pin no.	Symbol	Function
1	/CS1	Chip select input pin active when /CS1 is low
2	/RES	Reset signal input
3	A0	Display/control data select “H”:display data; “L”:control data
4	/WR(R/W)	6800 series: “H”:read, “L”:write; 8080 series: “L” write select
5	RD(E)	6800 series: enable clock input pin 8080 series: “L” read select enable pin
6	D0	8-bit bi-directional data bus. When serial mode is selected (P/S=”L”): D7: serial data input pin (SI) D6: serial clock input pin (SCL) D0 ~D5 are set to high impedance.
7	D1
8	D2
9	D3
10	D4
11	D5
12	D6(SCL)
13	D7(SI)
14	VDD	Power supply pin. (3.0V)
15	VSS	Ground (0)
16	VOUT	DC/DC voltage converter output. Connect a capacitor between this terminal and VSS
17	CAP3P	DC/DC voltage converter. Connect a capacitor between this terminal and CAP1N terminal
18	CAP1N	DC/DC voltage converter. Connect a capacitor between this terminal and CAP1P terminal
19	CAP1P	DC/DC voltage converter. Connect a capacitor between this terminal and CAP1N terminal
20	CAP2P	DC/DC voltage converter. Connect a capacitor between this terminal and CAP2N terminal
21	CAP2N	DC/DC voltage converter. Connect a capacitor between this terminal and CAP2P terminal
22	V4	LCD driving voltage 1).VDD(=V0)>V1>V2>V3>V4 2).V0=1/9V4,V1=2/9V4,V2=7/9V4,V3=8/9V4 Connect a capacitor between each pin with Vss
23	V3
24	V2
25	V1
26	V0
27	C86	MPU interface select I/O “H”:=6800 series; “L”:=8080 series
28	P/S	Parallel or Serial Interface. “H”: Parallel; ”L” Serial